State-of-the-Art CNC Machining Capabilities
Engineered specifically for biocompatible, chemically inert, and high-pressure fluidic flow paths where injection molding cannot achieve required tolerances or internal geometries.
5-Axis Swiss Micro-Turning
Ultra-precise turning for miniaturized fittings, 10-32 & 1/4-28 threaded ports, barbed adapters, and custom chromatographic ferrules down to 0.3mm OD.
- Minimum hole diameter: 0.15 mm (0.006")
- Thread concentricity: < 0.008 mm
- Burr-free cryogenic deburring
Multi-Port Manifolds & Blocks
Complex multi-channel fluid distribution blocks for automated liquid handlers, autosamplers, HPLC gradient valves, and flow cytometers.
- Zero-dead-volume intersecting channels
- Multi-layer diffusion bonded PEEK
- Pressure ratings up to 6,000+ PSI
Annealed & Stress-Relieved Resins
Eliminating post-machining dimensional creep, cracking, or solvent swelling through proprietary heat-treatment and cryogenic stress-relief cycles.
- 100% Victrex 450G virgin certified stock
- Lot-specific Material Test Reports (MTR)
- USP Class VI / FDA 21 CFR 177.2415
Engineered Polymers & Specialty Alloys
Select the optimal high-performance polymer for your analytical temperature, pressure, and solvent compatibility parameters.
| Material Grade | Tensile Strength | Max Temp | Pressure Rating | Chemical Resistance | Primary Applications |
|---|---|---|---|---|---|
| Virgin PEEK (Victrex 450G) | 100 MPa | 250 °C (482 °F) | Up to 7,000 PSI | Universal HPLC solvents (except conc. HNO3/H2SO4, THF/DMSO swell) | HPLC fingertight fittings, unions, tubing, valve rotors |
| Carbon-Filled PEEK (CA30) | 200 MPa | 260 °C (500 °F) | Up to 10,000 PSI | Exceptional wear resistance, static dissipative | High-speed rotary valves, UHPLC rotor seals, bearing seats |
| PCTFE (Kel-F®) | 40 MPa | 150 °C (302 °F) | Up to 3,500 PSI | Near-zero moisture absorption, halogen inert | Cryogenic valve seats, check valve retainers, gas manifolds |
| Virgin PTFE (Teflon™) | 25 MPa | 260 °C (500 °F) | < 500 PSI (Low Pres.) | 100% inert to virtually all acids, bases, organic solvents | Inlet filter bodies, diaphragm pumps, flangeless ferrules |
| Titanium Grade 5 (Ti-6Al-4V) | 950 MPa | 400 °C (752 °F) | 15,000+ PSI (UHPLC) | Bio-inert, impervious to high-salt buffers and mobile phases | Bio-inert UHPLC pump heads, filter housings, hybrid fittings |
Submit Your 2D Prints or 3D CAD Files for Immediate DFM Review
Our senior application engineers evaluate your part geometry, propose cost-saving DFM optimizations, verify thread concentricity, and return an official quotation within 1 to 4 business hours.
Accepted CAD & Drawing Formats:
Custom Machining RFQ Form
Complete the parameters below. An engineering representative will respond with pricing & lead time.
Frequently Asked Engineering Questions
How does LabioNex eliminate dead volume in custom PEEK manifolds?
We utilize 5-axis precision CNC machines equipped with high-speed micro-endmills and custom ball-nose drills to generate flat-bottom and tapered connection ports matching the exact cone geometry of standard 10-32 and 1/4-28 ferrules. Internal intersecting fluid channels are polished to eliminate unswept corner pockets where sample hang-up or carryover can occur.
What resin certifications are provided with custom PEEK orders?
All LabioNex PEEK components are machined exclusively from certified virgin Victrex® 450G stock. Every production lot is accompanied by a Certificate of Analysis (CoA) confirming compliance with USP Class VI biological reactivity tests, FDA 21 CFR 177.2415 contact regulations, and RoHS/REACH compliance.
Can LabioNex machine hybrid assemblies combining PEEK and Titanium?
Yes. For applications requiring extreme pressure handling (above 10,000 PSI) with complete bio-inertness, we manufacture hybrid assemblies pairing Grade 5 Titanium bodies with precision-machined PEEK or PCTFE seal cartridges, combining maximum structural rigidity with metal-free wetted pathways.