ISO 9001:2015 Certified Quality | ⚡ Worldwide 24-48h Express Dispatch | 🎯 100% Zero-Dead-Volume Guaranteed
sales@labionex.com | ⚡ 1-Hour RFQ Response
5-Axis Micro-CNC Machining · ISO 9001:2015 Certified

Custom PEEK & Fluoropolymer Components Engineered to ±0.005mm Micro-Precision

Direct engineering and OEM manufacturing partner for analytical instrument builders, biopharma fluidics, and chromatography manifolds. From rapid DFM review and 5-day prototypes to high-volume production with guaranteed zero dead volume.

Explore Engineering Tolerances ↓
±0.005 mm
Micro-Tolerance Capability
Ra < 0.2 µm
Mirror Sealing Surface Finish
0 Dead Vol
Cross-Drilled Pathway Guarantee
5 Business Days
Rapid First-Article Dispatch
Manufacturing Specifications

State-of-the-Art CNC Machining Capabilities

Engineered specifically for biocompatible, chemically inert, and high-pressure fluidic flow paths where injection molding cannot achieve required tolerances or internal geometries.

5-Axis Swiss Micro-Turning

Ultra-precise turning for miniaturized fittings, 10-32 & 1/4-28 threaded ports, barbed adapters, and custom chromatographic ferrules down to 0.3mm OD.

  • Minimum hole diameter: 0.15 mm (0.006")
  • Thread concentricity: < 0.008 mm
  • Burr-free cryogenic deburring

Multi-Port Manifolds & Blocks

Complex multi-channel fluid distribution blocks for automated liquid handlers, autosamplers, HPLC gradient valves, and flow cytometers.

  • Zero-dead-volume intersecting channels
  • Multi-layer diffusion bonded PEEK
  • Pressure ratings up to 6,000+ PSI

Annealed & Stress-Relieved Resins

Eliminating post-machining dimensional creep, cracking, or solvent swelling through proprietary heat-treatment and cryogenic stress-relief cycles.

  • 100% Victrex 450G virgin certified stock
  • Lot-specific Material Test Reports (MTR)
  • USP Class VI / FDA 21 CFR 177.2415
Polymer Science

Engineered Polymers & Specialty Alloys

Select the optimal high-performance polymer for your analytical temperature, pressure, and solvent compatibility parameters.

Material Grade Tensile Strength Max Temp Pressure Rating Chemical Resistance Primary Applications
Virgin PEEK (Victrex 450G) 100 MPa 250 °C (482 °F) Up to 7,000 PSI Universal HPLC solvents (except conc. HNO3/H2SO4, THF/DMSO swell) HPLC fingertight fittings, unions, tubing, valve rotors
Carbon-Filled PEEK (CA30) 200 MPa 260 °C (500 °F) Up to 10,000 PSI Exceptional wear resistance, static dissipative High-speed rotary valves, UHPLC rotor seals, bearing seats
PCTFE (Kel-F®) 40 MPa 150 °C (302 °F) Up to 3,500 PSI Near-zero moisture absorption, halogen inert Cryogenic valve seats, check valve retainers, gas manifolds
Virgin PTFE (Teflon™) 25 MPa 260 °C (500 °F) < 500 PSI (Low Pres.) 100% inert to virtually all acids, bases, organic solvents Inlet filter bodies, diaphragm pumps, flangeless ferrules
Titanium Grade 5 (Ti-6Al-4V) 950 MPa 400 °C (752 °F) 15,000+ PSI (UHPLC) Bio-inert, impervious to high-salt buffers and mobile phases Bio-inert UHPLC pump heads, filter housings, hybrid fittings
Direct Engineering Support

Submit Your 2D Prints or 3D CAD Files for Immediate DFM Review

Our senior application engineers evaluate your part geometry, propose cost-saving DFM optimizations, verify thread concentricity, and return an official quotation within 1 to 4 business hours.

Accepted CAD & Drawing Formats:

STEP (.stp, .step) IGES (.igs) SolidWorks (.sldprt) DXF / DWG PDF (2D with GD&T)
✓ Direct NDA: Mutual non-disclosure agreements signed before drawing transfer.
✓ Direct Email Upload: You may also email drawings directly to sales@labionex.com.
✓ CMM Inspection Report: First-article dimensional verification report included.

Custom Machining RFQ Form

Complete the parameters below. An engineering representative will respond with pricing & lead time.

Technical Knowledge Base

Frequently Asked Engineering Questions

How does LabioNex eliminate dead volume in custom PEEK manifolds?

We utilize 5-axis precision CNC machines equipped with high-speed micro-endmills and custom ball-nose drills to generate flat-bottom and tapered connection ports matching the exact cone geometry of standard 10-32 and 1/4-28 ferrules. Internal intersecting fluid channels are polished to eliminate unswept corner pockets where sample hang-up or carryover can occur.

What resin certifications are provided with custom PEEK orders?

All LabioNex PEEK components are machined exclusively from certified virgin Victrex® 450G stock. Every production lot is accompanied by a Certificate of Analysis (CoA) confirming compliance with USP Class VI biological reactivity tests, FDA 21 CFR 177.2415 contact regulations, and RoHS/REACH compliance.

Can LabioNex machine hybrid assemblies combining PEEK and Titanium?

Yes. For applications requiring extreme pressure handling (above 10,000 PSI) with complete bio-inertness, we manufacture hybrid assemblies pairing Grade 5 Titanium bodies with precision-machined PEEK or PCTFE seal cartridges, combining maximum structural rigidity with metal-free wetted pathways.

Scroll to Top